New SG800 born from the elegance and prestige always stand out BEINAT S.r.l. and from industrial exercise Idea. The device has the ability to control, the presence of many explosive and toxic gases. The microprocessor-controlled transducer not only provides alarm signals to the controller connected to it, but also allows self-diagnosis and thus automatic calculation, […]
Contact: | (Tiếng Việt) 0975 09 12 12 |
New SG800 born from the elegance and prestige always stand out BEINAT S.r.l. and from industrial exercise
Idea.
The device has the ability to control, the presence of many explosive and toxic gases. The microprocessor-controlled transducer not only provides alarm signals to the controller connected to it, but also allows self-diagnosis and thus automatic calculation, to always be accurate. Maximum detection probability. The probe has 0 ÷ 20% L.E.L. Linear output, in line with the standard 4 ÷ 20mA.
STORY
LEVEL 1, advance alarm. Set at 13% of L.E.L. The alarm before drive 1 relay
LEVEL 2, the main alarm. Set at 20% for L.E.L. Drive alarm 1 relay
The more important news of this probe is the ability to change sensor components at the end of a life cycle directly from a technician.
Power supply: 12 24 V. dc ± 10%
Power demand: 1.5 W maximum @ 13.8V
Alarm front relay: 10A SELV
Main alarm relays: 10A SELV
Indication: Green LED is working normally, Red status LED is flashing, Yellow LED is defective
Sensor: Catalyst
Input signal: 4 ÷ 20 mA
Data transfer: Not present
Service portal: current
1st alarm threshold: At 13% LEL
2nd alarm threshold: At 20% LEL
Test time: 90 seconds
Operating temperature: -20 ° C to + 60 ° C
Degree of protection: IP65
Compatible control unit: whole range
Case and size: Aluminum
Size: 100x100x60
Packaging: 197x122x67
Weight: 550 grams approx
Bình Luận