Trang chủ      

Ý kiến khách hàng

Video

Banner trái

Đồng hồ áp suất Màng Sandwich mặt 100, 0 – 6 kg/cm²(g)

Đồng hồ áp suất Màng Sandwich mặt 100, 0 – 6 kg/cm²(g)

FEATURES Compliance to latest EN – 837 Standard Range: (-) to 1600 kg / cm2 Bourdon in SS316 Ti  as standard, providing better Mechanical properties guaranteeing repeatability & accuracy Accuracy ± 1% (Standard ) ± 0.5% FSD on request Unit of measurement – kg / cm2, bar, PSI, kPa, MPa Pressure Gauges intended for process […]

Liên hệ: 0975 09 12 12

Giá bán: Liên hệ ( Chưa VAT )


  • Thông tin sản phẩm
  • Video

FEATURES

  • Compliance to latest EN – 837 Standard
  • Range: (-) to 1600 kg / cm2
  • Bourdon in SS316 Ti  as standard, providing better Mechanical properties guaranteeing repeatability & accuracy
  • Accuracy ± 1% (Standard ) ± 0.5% FSD on request
  • Unit of measurement – kg / cm2, bar, PSI, kPa, MPa
  • Pressure Gauges intended for process industries such as chemicals, petro- chemicals, energy or gas industry, food processing, nuclear, etc
  • These pressure gauges have been designed to satisfy requirement to operate in aggressive environment

SPECIFICATIONS

Ref.standard EN – 837
Dial 100 mm/150mm in Aluminium whitebackground Black marking
Cse SS304/SS316 with bayonet bezel phenol with Screwed bezel.
Pritection

IP-68 (IS:13947Part I/IEC:60529)

Window Safety glass (shatter proof/To ughened glass
Bourdon  SS316,SS316Ti,SS316L, Monel 
Socket 22mm Square in SS316,SS316Ti,SS316L, Monel
Movment SS304,SS316.
Range As per EN 837(refer table)minimum span 0.6kg/CM2 Maximum 1600kg/CM2
Connection ½ *NPT (M) as standard (other optional)
Accuracy ± 1 % FSD (0.5% on request)
Over range As per EN 837
Suitability (-) 20°c to 80°c (Service Temperature)
Zero adjustment Micrometer pointer
Blow out disc provided (on top)
Optional IBR Certification
Maximum pointer
NACE compliance
External Kn0b for zero setting
Built in snubber
Built in Gauge saver
Liquied Filled case ( SS case only )
Vacuum protection

SANDWICH TYPE DIAPHRAGM SEAL

Sandwich type Diaphragm Seals are the most commonly used Diaphragm Seals. The Diaphragm is sandwiched between Top Chamber & Bottom Chamber / Flange. These are available threaded as well as flanged process connection. For low Pressure Range & Smaller Flange Sizes, section type Diaphragm Seals are used.

Optionally, Flushing connection of 1⁄4 NPT(F) or 1⁄2 NPT(F) can be provided which enables the user to flush out / clean the area below the diaphragm without removing the Seal from the process line. For threaded process connection and flange connection with section, flushing connection shall be directly provided on the Bottom Chamber. For bigger Flange sizes, separate Flushing Rings (Spacer Rings) are usually provided.

Bình luận

Bình Luận

avatar
  Subscribe  
Thông báo cho

Sản phẩm cùng loại

Đăng ký tư vấn

Đăng ký Email để nhận tin tức mới nhất từ chúng tôi được gửi đến hộp thư đến của bạn!

TOP

0975 09 12 12