The new SGI600 series addressable sensor is capable of controlling catalytic technology through the presence of: See Table. The probe is managed by the microprocessor, in addition to providing an alarm signal to the connected control device, enabling self-diagnosis and then Auto-calibration, for maximum detection accuracy. multi over time. The monitored gas detection transmission occurs […]
| Contact: | (Tiếng Việt) 0975 09 12 12 |
The new SGI600 series addressable sensor is capable of controlling catalytic technology through the presence of: See Table.
The probe is managed by the microprocessor, in addition to providing an alarm signal to the connected control device, enabling self-diagnosis and then Auto-calibration, for maximum detection accuracy. multi over time.
The monitored gas detection transmission occurs via RS485 serial data transmission signal.
Also in this sensor can:
To select the Operating range up to 20% or 100% lel
Testing: for accurate and self-certification testing, use the TS1008 tool, which also serves to perform annual audits.
Power supply: 12 24 VDC ± 10%
Power on demand: Maximum 1W @ 13.8V
Signal: Diode LEDS: regular green function, yellow error light, red light alarm
Discovery: See below
Sensor: Catalyst
Sensor replacement: Automatic
Selecting range: 0 20% or 0 100%
Data transmission signal: RS485 prot. ModBus RTU
Autozero procedure: Included in the software
Package and protection degree: ABS IP55
Service portal: current
Operating temperature: from -10 ° C to + 50 ° C
Operating humidity: 0-90% without condensation
Size: ABS 78x114x58
Packaging size: 197x122x67
Weight: 250 grams
Compatible unit: BXI32
Địa chỉ: 322 Bình Lợi, Phường 13, Q. Bình Thạnh, TP. HCM
Tel: 028 6657 3636 / 0975 09 12 12 / 0938 540 586
Email : vokien.pt@gmail.com
2019 © Copyright (Tiếng Việt) CÔNG TY TNHH THƯƠNG MẠI KỸ THUẬT PT
Bình Luận